Home > Jacks/Hydraulic Lifting Equipment > Vehicle Lifts > Rolling Bridge Jacks >

Norco 79324F 6000 Lb. Rolling Lift Bridge - Air/Hyd. w/o $99.00 Adapter Kit

Norco 79324F 6000 Lb. Rolling Lift Bridge - Air/Hyd. w/o $99.00 Adapter Kit
 
List Price: $2,828.72
Our Price: $2,626.67
Save $202.05!


Product Code: 79324F
Qty:

Description
 
79324F
3 Ton Capacity
Air / Hydraulic Pump Operated
Rolling Lift Bridge

NOTE: Adapter bracket kits must be ordered
separately to adapt the universal mounting
brackets to the above ground lift’s rails.
The majority of applications will require model
79326C flat-end or model 79327C hook-end
adapter kits. Other kits are available upon request. INTENDED USE:
For use in conjunction with above ground lifts. The bridge straddles the lift rails and raises the vehicle’s tires off the rails for wheel alignment, brake, tire and suspension work
Features
  • Push button air/hydraulic pump provides safe, quick lifting.
  • Adjustable arms and lifting pads safely support the vehicle on the bridge.
  • Universal mounting brackets adjust to a lift rail opening of 46-1/2”. The universal mounting brackets can be installed in the bridge right side up or up side down for a total of eight different height locations when securing the adapters to the bracket. ADAPTER KITS ARE SOLD SEPARATELY.
  • Flat-end and hook-end adapter brackets are equipped with spring-loaded roller bearings for smooth maneuverability of bridge on lift rails.
  • Mechanical stop prevents accidental lowering of bridge.
  • Lowering is accomplished with one hand on the release lever and the other hand releasing the mechanical stop.
  • Equipped with rubber faced saddle for
  • differential lifting.
  • Available adapters:
  • 79326C: Flat-End Adapter Bracket Kit
  • 79327C: Hook-End Adapter Bracket Kit
  • 79328C: 9" Extension Adapters

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Jacks/Hydraulic Lifting Equipment > Vehicle Lifts > Rolling Bridge Jacks


1/2" Drive x 27mm Standard Duo-Socket - 6 Point $25.89
Sledge Hammer, 6 lb., 16 In, Brass $220.99
3/8" Drive x 11/16" Deep - 12 Point $6.32
1/4" Surface Drive x 4.5mm Deep $4.48
Ingersoll Rand 271 1" Impact Wrench $786.25
$14.14
3/4" Drive x 2-7/8" Standard $95.61
3/4" Drive x 13/16" Deep Square - 4 Point $33.03
1" Drive x 1-3/16" Standard $27.16